Hi Brian,
When you are in could you clean and autoclave the blue plastic pestesls in a flask covered with foil please.
Also could you please autoclave 2 1L Flasks full of 1.5ml microcentrifuge tubes. If you run out of tubes in the drawer there are more above the sink cabinets.
Thanks!
Hi Brian,
More old plates ready for autoclaving
Hi Brian,
When you’re able, could you put yellow caps on three bags of cryo tubes?
The beetles that need to be entered into the database are in the freezer labeled “for Brian.” As a reminder, the host field is left blank, the capture type is “flying -> EtOH,” and the vial # is written on the top and side of the vial.
There is a package on a shelf above the printer that needs to be shipped. Instructions for sending it are on a page on top of the package.
Brian, couple of things:
– can you make new plates with 2 liters of PDA-hard?
– return the drill please- the sink CAN be used but sparingly. Wash what’s inside.
Thanks!
J
Brian, I got a third shelf support, please go ahead and install it and put the two remaining incubators on the new shelf.
Thank you!
J
Brian, the old walk-in cooler is being cleaned by Adam, you don’t need to do anything until further notice.
Thanks,
Jiri
Could you bring up an incubator from the basement? It’s the same kind that as the ones next to the computer, and should be in a box somewhere around the main area. If you can’t find it, you may want to ask Adam where they were put.
Hi Brian,
There are some old plates that need autoclaving next to the white board.
Also, we need 1L of quarter strength PDA and 1L of MEA (malt extract agar). The MEA will be in Jason’s lab, probably in a premade container like our PDA is. In the future, we’ll buy our own, but I want to try a test batch with some fungi first. When you find the container, could you write down the supplier/brand name and REF # and post it on here? Thanks!
Autoclave collection tubes and stuff with a kimwipe
(c) 2013 Ambrosia Symbiosis Lab Protocols
